Overheight Frames

Fully Automatic and Universal Frames

BA-030E

This overheight frame is the most advanced solution for managing over-sized cargo in ports. The design and mode of operation allows a drastic reduction in time spent loading and unloading increasing the security for the stevedores. It is the perfect model for intense over-sized cargo traffic. It has unlimited range of hours of continuous operation due to its low power consumption. Being universal and not requiring a parking stand, this overheight frame is mobile and one single frame can meet almost all of the needs relating to over-sized cargo handling at a terminal.

Features:

• SWL 50Tons (standard)
• Tare 3.5T for 40ft and 2.7T for 20ft
• Fixed 20ft / fixed 40ft or telescopic 20ft to 45 ft
• Variable free height from 2.0 – 3.0m. Standard height = 2.7m
• Connected to the spreader through the twist locks of the main spreader
• Requires no modification / intervention on the spreaders at the terminal
• Universal – works with any type of spreader and on any type of machine
• Fully autonomous due to solar panels
• Does not require a parking stand and can be parked anywhere in the terminal
• Shows a digital display of information about the use and operation of the frame such as number of cycles, sensor status, operating hours, battery levels
• Lighting and acoustic signals increase worker safety
• Transportable inside a 20ft container to reduce costs
• Includes instructions, maintenance instructions and CE certificate

Semi-Automatic and Universal Frames

BA-030H

This overheight frame is the ideal choice to suit moderate over-sized cargo traffic optimising safety and efficiency. It is the middle ground between fully automatic and manual drive models.

Following the principle of semi-automatic spreaders – the proper motion of lifting/lowering of the crane opens and closes the overheight frame twistlocks. Includes security probes preventing the false opening/closing of the twist locks.

Features:

• SWL: 50t (standard)
• Tare: 3.6t for 40ft and 3t for 20ft
• Fixed 20ft / fixed 40ft or telescopic 20ft to 45 ft
• Variable free height from 2.0 – 3.0m. Standard height = 2.7m
• Connected to the spreader through the twist locks of the main spreader
• Requires no modification / intervention on the spreaders at the terminal
• Universal – works with any type of spreader and on any type of machine
• Does not require a parking stand and can be parked anywhere in the terminal
• Easy maintenance due to only mechanical parts
• Red/green coloured panels indicate the crane operator of the situation of the twist locks
• Transportable inside a 20ft container to reduce costs
• Includes instructions, maintenance instructions and CE certificate

Overheight Manual and Universal Frames

BA-030M

This overheight frame is the ideal solution for a low level of oversized cargo traffic. It represents a huge advance over the traditional use of chains with hooks. The twist locks are opened / closed using chains located at the short sides of the frame. Includes security probes preventing the false opening/closing of the twist locks.

Features:

• SWL: 60t (standard)
• Tare 3.6T for 40ft and 2.8T for 20ft
• Fixed 20ft / fixed 40ft or telescopic 20ft to 45 ft
• Variable free height from 2.0 – 3.0m. Standard height = 2.7m
• Connected to the spreader through the twist locks of the main spreader
• Requires no modification / intervention on the spreaders at the terminal
• Universal – works with any type of spreader and on any type of machine
• Does not require a parking stand and can be parked anywhere in the terminal
• Easy maintenance due to only mechanical parts
• Red/green coloured panels indicate the crane operator of the situation of the twist locks
• Transportable inside a 20ft container to reduce costs
• Includes instructions, maintenance instructions and CE certificate

Mechanical Frames

BA-030R

This overheight frame is the best solution when physical connection between the overheight frame and the main spreader is required. When the main spreader twist locks open the overheight frame also opens. The same mechanism is used when the main spreader closes. This configuration greatly assists the task of the crane operator. There is no power supply, it is a completely mechanical model.

Features:

• SWL 40Tons (standard)
• Tare 3.4T for 40ft + Telescopic and 3.2T for 20ft
• Fixed 20ft / fixed 40ft or telescopic 20ft to 45 ft
• Free height 2.5m
• Connection to the main spreader through its own twist locks when these are closed and through latching plates when the twist locks of the main spreader are open.
• Spreaders used with this overheight frame require installation of latching plates. Those latching plates can be provided or installed together with the overheight frame
• Easy maintenance as it only has mechanical parts (no electrical or hydraulic systems)
• Requires a parking stand to engage and disengage the overheight frame from the main spreader
• Transportable inside a 20ft container to reduce costs
• Includes instructions, maintenance instructions and CE certificate